You're viewing a previously published revision of this guide.  View latest revision

Older
Jan 17, 2022 - 03:01:24
Jun 17, 2023 - 07:06:38 Jun 17, 2023 - 07:06:20 Jun 17, 2023 - 07:06:48 Nov 20, 2022 - 02:11:36 Aug 22, 2022 - 08:08:07 Aug 22, 2022 - 08:08:54 Aug 22, 2022 - 08:08:45 Aug 21, 2022 - 12:08:33 Aug 21, 2022 - 12:08:47 Aug 21, 2022 - 12:08:12 Aug 21, 2022 - 12:08:05 Aug 21, 2022 - 12:08:15 Aug 21, 2022 - 11:08:55 Aug 21, 2022 - 11:08:27 Aug 21, 2022 - 11:08:18 Aug 21, 2022 - 11:08:13 Aug 21, 2022 - 11:08:46 Aug 21, 2022 - 11:08:00 Aug 21, 2022 - 11:08:58 Aug 21, 2022 - 11:08:01 Aug 21, 2022 - 10:08:08 Jan 17, 2022 - 03:01:24 Nov 11, 2021 - 06:11:41 Nov 11, 2021 - 05:11:53 Nov 11, 2021 - 05:11:46 Nov 11, 2021 - 12:11:59 Nov 11, 2021 - 12:11:29 Nov 11, 2021 - 12:11:28 Nov 11, 2021 - 12:11:27 Nov 05, 2021 - 04:11:42 Nov 05, 2021 - 04:11:02 Nov 05, 2021 - 04:11:14 Nov 05, 2021 - 04:11:13 Nov 05, 2021 - 04:11:11 Nov 05, 2021 - 04:11:45 Nov 05, 2021 - 04:11:07 Nov 05, 2021 - 04:11:45 Nov 05, 2021 - 04:11:10 Nov 05, 2021 - 07:11:35
Newer

Stage 00: Unboxing and Introduction

Written By: Makertech 3D
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Sections

1

Flags

0

Introduction

The Dual Switching Hotend build manual for a non-Proforge printer will assume that you already have an understanding of open-source 3d printers and are comfortable editing the Marlin firmware for your own specific set-up.

  1. When Unboxing check that you have the following: Metal Parts

    • When Unboxing check that you have the following:

    • Metal Parts

    • DSH Mechanics

    • DSH Electronics

    • NEMA 17 Motors and Cables

    • Other Parts Bag

    • Braided Sleeving

    • DSH Heatsink

    • DSH Backplate

    • DSH Probe and Fan Mount

    • Heatbreak (All Metal)

    • Heatbreak (PTFE Lined) x2

    • Heater Block x2

    • Brass Nozzles 0.4mm x2

    • PTFE Coupling PC4-M6 x2

    • Silicone Heater Block Covers x2

    • 1.9mm PTFE Tubing 2M

    • Extruder Feeder x2

    • Thermistor

    • Heater Cartridges x2

    • Blower Fan

    • 30mm Fan x2

    • Stepper Driver

    • NF-450 Thermistor

    • NEMA 17 Motor x2

    • Motor Cable x2

    • DSH Fan Shroud

    • Servo Arm

    • Probe

    • Servo Cable

    • Spacers

    • Servo

    • Needle Bearing (x2) and Washers (x1)

    • Fasteners and Cable Ties

    • NF-450 Thermistor

    • All Metal Heatbreak

  8. Tool Carrraige

    • Tool Carrraige

    • Rollers and Bearing Set (x4)

    • GT2 Belt

    • M5 Eccentric Spacer (x2)

    • M5 x 6mm Spacer (x2)

    • Fasteners: - M5 x 25mm Bolts (x5) - M5 Nyloc Nuts (x5) - M5 Washer (x5) - M4 x 10mm Bolt (x2) - M4 Nyloc Nuts (x2)

    • Allen Keys

    • Scissors

    • Needle Nose pliers

    • Slip Joint Pliers

    • A lighter (for braided sleeving - optional)

    • If you get stuck at any point or need help with assembly or printing something, feel free to post in the official forum.

    • If you're missing a part or have received a faulty/broken one, please use this form here to order a replacement.

    • Want to get in touch? Drop us an email at info@makertech3d.com

Author

Makertech 3D

Member since: 03/09/2018

43,892 Reputation

110 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 17

All Time: 1,034