Skip to main content
    • Check that you have everything against the packing list that can be found at the bottom of this page.

    • Included Tools: Pliers, Allen keys, Cable ties

    • You will also need (not included): Scissors, Lighter, Phillips head screwdriver, Small flat head screwdriver, Tape measure

    • Optional: Electrical Tape, Lubricant for the rails.

    • Missing in some kits is a 3mm Allen key, this is need for the M5 bolts. If you don't already own one, just drop us an email, and we can have one sent out.

    • If you get stuck at any point or need help with assembly or printing something, feel free to post in the official forum.

    • If you're missing a part or have received a faulty/broken one, please use this form here to order a replacement.

    • Want to get in touch? Drop us an email at

Finish Line

3 other people completed this guide.

Makertech 3D

Member since: 03/09/2018

38,378 Reputation

106 Guides authored


I don’t see a way to edit my previous comment to add this: I also found myself using an adjustable wrench, and a larger allen wrench than the 3 included on a number of steps. I don’t have a ready way to check the size on the allen wrench I needed, but it was the one for all the M5 fasteners.

It may be that the pliers will work in place of the adjustable wrench in a pinch. I tend to mangle things whenever I attempt that feat, though.

Greg Murnane - Reply

A 3mm Allen key should have been included for the M5 bolts, if you still need one, please email us at

Makertech 3D -

A drill bit for deburring the top plate rail holes is later required, but not listed here. 5/32 worked for me, but I think any split point bit between 9/64 and 1/4 would have worked.

Greg Murnane - Reply

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 5

Past 30 Days: 13

All Time: 515