-
-
Before installing the Switching Hotend you may find it useful to have a CAD model of it. You can find a STEP file of the DSH from the link below:
-
-
-
-
The kit includes two extruders and two NEMA 17 motors.
-
Feel free to use your own extruders in place of these.
-
-
-
The DSH fixes onto your gantry by 4 M3 bolts spaced 31mm apart from each other. This is the same hole spacing found on NEMA 17 motors.
-
If your printers gantry is a piece of 2020 aluminium extrusion you may be able to use the Proforge 2S tool carriage, available for separate purchase here.
-