Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Y - Motor and Endstop Cables
-[* green] Feed a 3-pin 1.5M Cable around the Y-Motor.
-[* orange] Push the cable through the slot on the Z-Axis Bracket and connect the cable to the endstop.
-[* blue] Connect a 4-pin 1.5M cable to the Y-Axis Motor.
+[* green] Connect to the Y-Endstop its cable.
+[* orange] Feed the cable around the Y-Motor.
+[* blue] Connect a motor cable to the Y-Motor.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Old Version

New Version