Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Makertech

Edit approved by Makertech


Step Lines

-[title] Cable Tying Cont.
+[title] Cable Tying
[* light_blue] Raise the Gantry to its highest position.
- [* orange] Check that the extruder cables loop up like shown.
-[* green] Move the Print Platform out to the left with the back of the Proforge 2/2S facing you.
-[* red] Carefully lay it down on its side.
- [* icon_caution] Use a book (or a roll of tape like shown) to raise the top end up to prevent the extuder mount from being crushed.
+[* red] Carefully lay the machine down on its side like shown.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3