Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

-[title] HotEnd Heater and Themristor
-[* black] Connect the HotEnd heater cables to the HE1 terminal on the control board.
- [* icon_note] You will need to unscrew the board from its mounts to properly access it.
+[title] HotEnd Heater and Thermistor
+[* red] Connect the HotEnd heater cables to the ***HE0 ***terminal on the control board.
+ [* icon_note] The +/- position of the cables is not important.
+ [* icon_note] You may need to unscrew the board from its mounts to properly access it.
+[* blue] Connect the Thermistor to the TH1 connector on the baord.

Image 1

No previous image

Added

Image 2

No previous image

Added