Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

-[title] HotEnd Heater and Thermistor
-[* red] Connect the HotEnd heater cables to the ***HE0 ***terminal on the control board.
- [* icon_note] The +/- position of the cables is not important.
- [* icon_note] You may need to unscrew the board from its mounts to properly access it.
-[* blue] Connect the Thermistor to the TH1 connector on the baord.
+[title] Hotend Wiring
+[* green] Find the group of cables from the Hotend.
+ [* yellow] Hotend Heater Cables
+ [* light_blue] Thermistor Cables
+ [* orange] Hotend Fan Cables
+[* yellow] Connect the Hotend heater cables to the ***HE0 ***terminal on the control board.
+ [* icon_reminder] The +/- position of the cables is not important.
+ [* icon_reminder] You may need to unscrew the board from its mounts to properly access it.
+[* light_blue] Connect the Thermistor cables to the TH1 connector on the board.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

No previous image

Added