Changes to Step #10
Step Lines
| - | [title] Probe and Fans |
|---|---|
| - | [* black] asd |
| + | [title] Hotend Fan |
| + | [* icon_note] Connect the Hotend fan directly to the power supply. |
| + | [* red] Red cable to positive. |
| + | [* black] Black cable to negative. |
| + | [* icon_reminder] You can cut the cable down for a better fit but remember to leave some spare if you plan on installing the Dual Switching Extruder Upgrade. |
Image 1
Old Version
New Version
Image 2
Deleted