Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #16

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Extruder and Filament Sensor
-[* black] Connect the filament sensor to the board (X-, but the software will read it as the sensor).
-[* black] Connect the Motor to the E1 position on the board.
+[* green] Connect the filament sensor to the board (X-, but the software will read it as the sensor).
+[* blue] Connect the Motor to the E1 position on the board.
[* icon_note] Route the motor cable across the top of the power supply.

Image 1

No previous image

Added

Image 2

No previous image

Added