Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #16

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Extruder and Filament Sensor
-[* green] Connect the filament sensor to the Touch Screen, make sure the white cable is connected to the B1 position.
-[* blue] Connect the Extruder Motor to the E1 position on the board.
- [* icon_note] Route the motor cable across the top of the power supply.
+[* icon_note] Find the Extruder motor cable and filament sensor cable.
+[* blue] Connect the filament sensor to the Touch Screen.
+[* orange] Connect the Extruder Motor to the E10 position on the board.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

No previous image

Added