Changes to Step #16
Step Lines
| [title] Extruder and Filament Sensor | |
| [* icon_note] Find the Extruder motor cable and filament sensor cable. | |
| + | [* orange] Connect the Extruder Motor to the E10 position on the board. |
| [* blue] Connect the filament sensor to the Touch Screen. | |
| - | [* orange] Connect the Extruder Motor to the E10 position on the board. |
Image 1
Old Version
New Version
Image 2
Old Version
New Version
Image 3
Old Version
New Version