Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #18

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Z and X-Motor
[* blackgreen] Connect the Z-Motor to the Z position on the boardboard with a 4-pin 50CM cable.
[* blackblue] Connect the X-Motor to the X position on the boardboard with a 4-pin 50CM cable.
[* blackgreen] Connect the Z-Motor to the Z position on the boardboard with a 4-pin 50CM cable.
[* blackblue] Connect the X-Motor to the X position on the boardboard with a 4-pin 50CM cable.
[* icon_note] Route the cables across the top of the power supply.

Image 1

No previous image

Added

Image 2

No previous image

Added