Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #18

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

-[title] Z and X-Motor
-[* green] Connect the Z-Motor to the Z position on the board with a 4-pin 50CM cable.
-[* red] Connect the X-Motor to the X position on the board with a 4-pin 50CM cable.
- [* icon_note] Route the cables across the top of the power supply.
+[title] X-Motor
+[* green] Connect a motor cable to the X-motor.
+[* red] Connect the X-motor to the control board.

Image 1

Old Version

New Version

Image 2

Old Version

New Version