Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #25

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Stepper Drivers
-[* icon_caution] ***See next step for Proforge 2S.***
-[* green] Prepare four of the A4988 Stepper Drivers by removing them from their packaging and sticking the heatsink to the black chip.
+[* green] Prepare two of the A4988 Stepper Drivers by removing them from their packaging and sticking the Heatsink to the black chip.
[* icon_note] Make sure the heatsink is not touching any of the pins.
[* icon_note] Orient the fins of the heatsink as shown.
- [* icon_note] The kit includes a fifth A4988 Stepper driver as a spare.
-[* blue] Fix the four Stepper Drivers onto the the control board as shown in the X, Y, Z and E0 positions.
+ [* icon_note] The kit also includes a spare A4988 Stepper driver.
+[* blue] Fix the two Stepper Drivers onto the the control board as shown in the Z and E0 positions.
[* icon_caution] Make sure that the screw trimpot is pointing towards the touch screen.

Image 1

Old Version

New Version

Image 2

Old Version

New Version