Changes to Step #26
Step Lines
| [title] Stepper Drivers - Proforge 2S | |
| - | [* green] Prepare two of the A4988 |
| + | [* green] Prepare two of the A4988 stepper drivers and the two TMC2100 stepper drivers by removing them from their packaging and sticking on the heatsinks as shown in the images. |
| [* icon_note] Make sure the heatsink is not touching any of the pins. | |
| [* icon_note] Orientate the fins of the heatsink as shown. | |
| [* icon_note] The Kit will have 5 A4988 Stepper dirvers in total, for the Proforge 2S you will only need to use two, the remaining are spares. | |
| - | [* blue] Fix the two Stepper Drivers onto the the control board as shown in the Z and E0 positions. |
| - | [* icon_caution] Make sure that the screw trimpot is pointing towards the touch screen. |
| + | [* blue] Fix the two A4988 Stepper Drivers onto the the control board as shown in the Z and E0 positions. |
| + | [* orange] Fix the two TMC2100 Stepper Drivers to the X & Y Positions. |
| + | [* icon_caution] MAKE SURE TO MATCH THE ORIENTATION AS SHOWN IN THE THIRD IMAGE. |
Image 1
Old Version
New Version
Image 2
Old Version
New Version
Image 3
No previous image
Added