Changes to Step #26
Step Lines
| [title] Stepper Drivers - Proforge 2S | |
| [* green] Prepare the two TMC2100 stepper drivers by removing them from their packaging and sticking on the Heatsinks as shown in the images. | |
| [* icon_note] Make sure the heatsink is not touching any of the pins. | |
| [* icon_note] Orient the fins of the heatsink as shown. | |
| - | [* |
| - | [* icon_caution] When in stalling match the orientation of the drivers as shown in the second image. |
| - | [* icon_reminder] If |
| + | [* light_blue] Fix the two TMC2100 Stepper Drivers to the X & Y Positions. |
| + | [* icon_caution] When in stalling match the orientation of the drivers as shown in the second image. |
| + | [* icon_reminder] If you're building the Proforge 2 use the red A4988 drivers here. |
Image 1
Old Version
New Version
Image 2
Old Version
New Version