Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #26

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Stepper Drivers - Proforge 2S
-[* green] Prepare the two TMC2100 stepper drivers by removing them from their packaging and sticking on the Heatsinks as shown in the images.
+[* green] Prepare the two TMC2100 stepper drivers by removing them from their packaging and sticking on the Heatsinks as shown in the first image.
[* icon_note] Make sure the heatsink is not touching any of the pins.
[* icon_note] Orient the fins of the heatsink as shown.
[* light_blue] Fix the two TMC2100 Stepper Drivers to the X & Y Positions.
- [* icon_caution] When in stalling match the orientation of the drivers as shown in the second image.
-[* icon_reminder] If you're building the Proforge 2 use the red A4988 drivers here.
+ [* icon_reminder] When installing, match the orientation of the drivers as shown in the second image.
+ [* icon_caution] Installing a stepper driver the wrong way round will destroy it.
+[* icon_note] If you're building the Proforge 2 use the red A4988 drivers here.

Image 2

Old Version

New Version