Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by Makertech

Edit approved by Makertech


Step Lines

[title] Stepper Drivers - Proforge 2S Cont.
[* green] Prepare the two TMC2100 Stepper Drivers by removing them from their packaging and sticking the heatsink to the golden heat wells on the PCB as shown.
[* icon_note] Make sure the heatsink is not touching any of the pins.
[* icon_note] Orientate the fins of the heatsink as shown.
-[* light_blue] Fix the TMC2100 Stepper Driver onto the Stepper Noise Filter.
- [* icon_caution] Orientate as shown in the third image.

Image 2


Image 3