Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #12

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Probe Wiring
-[* blue] Connect the brown wire form the probe directly to a positive terminal on the power supply.
-[* green] Fix the connector to the electronics board in the "Z-" port.
+[* blue] Connect the brown wire from the probe directly to a positive terminal on the power supply.
+[* green] Fix the connector to the electronics board as shown in the second image.

Image 2

Old Version

New Version