Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Makertech

Edit approved by Makertech


Step Lines

[title] DSE: Second Hotend Wiring
-[* green] Connect the Hotend heater cables to the electronics board.
+[* green] Connect the Hotend #2 (on the right) heater cables to the electronics board.
[* red] Unplugging the print fan cable for the board should give you better access.
[* icon_reminder] If you're struggling to the get the cables in, removing the electronics board from the base will give you better access to the terminals.
+[* violet] Connect the Hotend's thermistor to the electronics board (TH2).

Image 3

No previous image