Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #3

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] 2040 ExtrusionAluminium Extrusions
[* light_blue] Loosly attach an M5 x 6mm boltred] Prepare two steel extrusion brackets with anM5x8mm bolts and M5 T-Nut onT-Nuts.
[* icon_reminder] Loosely attach
the two holes on the back of the BaseM5 T-Nuts.
[* red] Slide ontoorange] Use the steel extrusion brackets to fix together the t-nuts the 2040x450mm extrusion.
[* orange
2040 x 500mm and 2020 x 360mm beams.
[* green] 2040 x 500mm Beam
[* blue] 2020 x 360mm Beam
[* icon_reminder
] Make sure there are no gaps between the bottom is flush with the Base.
[* green] Keeping
two beams and that the 2040 beam as straight as possible (a set square could be used here but is not mandatory), tighten the M5 bolts down FIRMLYover hanging.
[title] 2040 ExtrusionAluminium Extrusions
[* light_blue] Loosly attach an M5 x 6mm boltred] Prepare two steel extrusion brackets with anM5x8mm bolts and M5 T-Nut onT-Nuts.
[* icon_reminder] Loosely attach
the two holes on the back of the BaseM5 T-Nuts.
[* red] Slide ontoorange] Use the steel extrusion brackets to fix together the t-nuts the 2040x450mm extrusion.
[* orange
2040 x 500mm and 2020 x 360mm beams.
[* green] 2040 x 500mm Beam
[* blue] 2020 x 360mm Beam
[* icon_reminder
] Make sure there are no gaps between the bottom is flush with the Base.
[* green] Keeping
two beams and that the 2040 beam as straight as possible (a set square could be used here but is not mandatory), tighten the M5 bolts down FIRMLYover hanging.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Old Version

New Version