Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by Makertech

Edit approved by Makertech


Step Lines

[title] 2020x360mm Support Extrusion
[* black] Take the 2020x360mm extrusion and attach to one end a Corner Bracket with M5x6mm bolt matching the orientation in the image, do not tighten yet.
[* black] Next attach to the Base two M5x6mm bolts with M5 T-Nuts.
[* black] Finally fix the support strut in place, tightening FIRMLY the bolts in the order shown in the image.
[* icon_note] Make sure not to leave a gap between the two extrusions.