Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] IEC Switch
[* icon_cautionred] Check that IEC Switch has a fuse by popping open the compartment with a flat head screw driver.
[*

[*
icon_caution] Check that the IEC Switch cables are all properly connected and insulated as shown in the image.
[* icon_cautionred] Check that IEC Switch has a fuse by popping open the compartment with a flat head screw driver.
[*

[*
icon_caution] Check that the IEC Switch cables are all properly connected and insulated as shown in the image.
[* blue] Install the IEC Switch with two M4x10mm bolts and M4 Nyloc Nuts.
[* icon_note] The top M4 Nyloc nut can be accessed from the hole on the base.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Deleted