Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] IEC Switch
[* icon_caution] Check that IEC Switch has a fuse by popping open the compartment with a flat head screw driver.
[* icon_caution] Check that the IEC Switch cables are all properly connected and coveredinsulated as shown in the image.
[* icon_caution] Check that the IEC Switch cables are all properly connected and coveredinsulated as shown in the image.
[* black] Install the IEC Switch with two M4x10mm bolts and M4 Nyloc Nuts.
[* black] Match the orientation shown in the image