Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Power Supply Unit
[* black] Installicon_caution] Check that the PSU onto the base with four M3 x 6mm bolts.
[* black] Attach the cables
is set to it frommatch your mains voltage by flipping the IEC switch as shown inon the image.side of the PSU with a flat head screw driver. INCORECTLY SETTING THIS WILL DAMAGE THE PSU!
[* black] Groundgreen] Fix the framePSU to the PSUbase with the grounding cable, M4four M3 x 10mm bolt and M4 Nyloc Nut6mm bolts.
[* icon_caution] Double checkicon_note] Orientate so that it is wired correctly and firmlythe connecting terminals are facing the back of the base.
[* black] Installicon_caution] Check that the PSU onto the base with four M3 x 6mm bolts.
[* black] Attach the cables
is set to it frommatch your mains voltage by flipping the IEC switch as shown inon the image.side of the PSU with a flat head screw driver. INCORECTLY SETTING THIS WILL DAMAGE THE PSU!
[* black] Groundgreen] Fix the framePSU to the PSUbase with the grounding cable, M4four M3 x 10mm bolt and M4 Nyloc Nut6mm bolts.
[* icon_caution] Double checkicon_note] Orientate so that it is wired correctly and firmlythe connecting terminals are facing the back of the base.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added