Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Makertech

Edit approved by Makertech


Step Lines

[title] Power Supply Unit
[* icon_caution] Check that the PSU is set to match your mains voltage by flipping the switch on the side of the PSU with a flat head screw driver. INCORECTLY SETTING THIS WILL DAMAGE THE PSU!
[* green] Fix the PSU to the base with four M3 x 6mm bolts.
[* icon_note] Orient so that the connecting terminals are facing the back of the base.

Image 1

Old Version

New Version

Image 2

No previous image