Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Power Supply Unit
[* black] Install the PSU onto the base with four M3 x 6mm bolts.
[* black] Attach the cables to it formfrom the IEC switch as shown in the image.
[* black] Attach the cables to it formfrom the IEC switch as shown in the image.
[* black] Ground the frame to the PSU with the grounding cable, M4 x 10mm bolt and M4 Nyloc Nut.
[* icon_caution] Double check that it is wired correctly and firmly.