Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #11

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Y & Z Stepper Motors
[* orange] Orient thegreen] Install two NEMA 17 Motors as shown inmotors to the imageBase; orientate the cable ports towards the front of the base.
[* green] Attach eachorange] Fix the motor toon the Baseleft of the 2040 beam with four M3 x 6mmM3x6mm button head bolts.
[* light_blue] Fix the motor on the right of the 2040 beam with M3x6mm cap head bolt and M3 washer.
[* orange] Orient thegreen] Install two NEMA 17 Motors as shown inmotors to the imageBase; orientate the cable ports towards the front of the base.
[* green] Attach eachorange] Fix the motor toon the Baseleft of the 2040 beam with four M3 x 6mmM3x6mm button head bolts.
[* light_blue] Fix the motor on the right of the 2040 beam with M3x6mm cap head bolt and M3 washer.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

No previous image

Added