Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #11

Edit by Mike O'Shaughnessy

Pending approval

Before
After
Unchanged

Step Lines

[title] Y & Z Stepper Motors
[* green] Install two NEMA 17 motors to the Base; orientate the cable ports towards the front of the base.
[* orange] Fix the motor on the left of the 2040 beam with four M3x6mm button head bolts.
[* light_blue] Fix the motor on the right of the 2040 beam with four M3x6mm cap head bolts and four M3 washers.
[* orange] Fix the motor on the left of the 2040 beam with four M3x6mm button head bolts.
[* light_blue] Fix the motor on the right of the 2040 beam with four M3x6mm cap head bolts and four M3 washers.