Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #13

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Touch Screen
[* black] Install the Touch Screen withorange] Prepare four M3 x 14mm bolts and M3 Nyloc Nut.
[* black] Add an
M3 x 5mm spacer to each bolt betweenspacers onto the base and Touch Screentouch screens mounting mounting holes.
[* black] Attachgreen] Fix the ribbon cable totouch screen onto the back of the Screen and to the board as shownbase with four M4 nyloc nuts.
[* black] Install the Touch Screen withorange] Prepare four M3 x 14mm bolts and M3 Nyloc Nut.
[* black] Add an
M3 x 5mm spacer to each bolt betweenspacers onto the base and Touch Screentouch screens mounting mounting holes.
[* black] Attachgreen] Fix the ribbon cable totouch screen onto the back of the Screen and to the board as shownbase with four M4 nyloc nuts.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added