Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #17

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] USB B Port
[* blackblue] Fix the USB B cable to the back of the base with two M3 x 14mm bolts and M3 Nyloc Nuts.
[* black] Insertgreen] Connect the other end intoside to the baordControl Board.
[title] USB B Port
[* blackblue] Fix the USB B cable to the back of the base with two M3 x 14mm bolts and M3 Nyloc Nuts.
[* black] Insertgreen] Connect the other end intoside to the baordControl Board.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added