Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Installing the Support Beam Assembly
[* black] Insert wisdom heregreen] Slide the Support Beam Assembly in through the rectangle hole from the underneath of the Base.
[* icon_reminder] The wider 2040 Beam should be pointing upwards.
[* red] Secure the support beam assembly to the base by tightening down the four M5x8mm bolts.
[* icon_reminder] Use the rectangle holes to check that all of the T-Nuts have correctly attached to the extrusion beam. Sometime you may need to use the end of an allen key to force them to turn
.
[title] Installing the Support Beam Assembly
[* black] Insert wisdom heregreen] Slide the Support Beam Assembly in through the rectangle hole from the underneath of the Base.
[* icon_reminder] The wider 2040 Beam should be pointing upwards.
[* red] Secure the support beam assembly to the base by tightening down the four M5x8mm bolts.
[* icon_reminder] Use the rectangle holes to check that all of the T-Nuts have correctly attached to the extrusion beam. Sometime you may need to use the end of an allen key to force them to turn
.

Image 1

No previous image

Added