Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Mike O'Shaughnessy

Pending approval

Before
After
Unchanged

Step Lines

[title] Installing the Support Beam Assembly
[* green] Slide the Support Beam Assembly in through the rectangle hole from the underneath of the Base.
[* icon_reminder] The wider 2040 Beam should be pointing upwards.
[* red] Secure the support beam assembly to the base by tightening down the four M5x8mmM5 x 8mm bolts.
[* red] Secure the support beam assembly to the base by tightening down the four M5x8mmM5 x 8mm bolts.
[* icon_reminder] Use the rectangle holes to check that all of the T-Nuts have correctly attached to the extrusion beams. Sometime you may need to use the end of an allen key to force them to turn.