Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] IEC Switch Install
[* green] Fix the Switch to the Base with two M4x10mm bolts and M4 Nyloc Nuts.
[* icon_reminder] Make sure the switch faces towards to side panel.
[* icon_reminder] Use the hole in the top of the base to gain access to the top M4 Nut with the pliars.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added