Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #9

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Fixing the Power Supply to the Base
[* yellow] Align the 4mm holes on the back of the power supply with the four 4mm holes on the base.
[* yellow] Align the 4mm holes on the back of the power supply with the four 4mm holes on the base.
[* light_blue] Fix the power supply to the base with four M4x6mm bolts.
[* icon_cautionicon_reminder] Make sure the screw terminals on the power supply are facing towards the switch.
[* icon_cautionicon_reminder] Make sure the screw terminals on the power supply are facing towards the switch.