Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #20

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Wiring the MOSFET
[* green] Connect the other ends of the power cablecables from the MOSFET to the power supply:
[* green] Connect the other ends of the power cablecables from the MOSFET to the power supply:
[* black] Black = Negative (-)
[* red] Red = Positive (+)
[* blue] Connect the white cable (included in the MOSFET bag) to the MOSFET.
[* yellow] Connect the other end of the white cable to the contolcontrol board as shown in the last image.
[* yellow] Connect the other end of the white cable to the contolcontrol board as shown in the last image.
[* icon_reminder] Which way round you plug the white cable in doesn't matter.
[* icon_reminder] You may need to unscrew the control board from the base to get better access.