Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by Bruce Segal

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Grounding the Frame
[* violet] Take the grounding cable and attach one side to the EARTH terminal on the PSU.
[* blue] It is easiest to do if you oreintateorientate the flat sides of the two Earth cables together.
[* blue] It is easiest to do if you oreintateorientate the flat sides of the two Earth cables together.
[* orange] Attach the other side of the Earth cable to the back of the base with an M4 x 10mm bolt and M4 nyloc nut.