Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #14

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Control Board InstallPower Cables
[* blackicon_caution] Before handling the board ground yourself by touching a large metal object. Also avoid placing the board on carpet or anything that may cause a static charge.
[* red] Fix the black and red power cables into the connector on the control board.
[* orange] Oreientate the cables upwards as shown in the photo.
[* green] Connect Red to + and Black to - as marked on the board.
[* blue] Make sure to insert the stripped section of the cable into the connector entirely and to fasten the set screw down TIGHTLY.
[title] Control Board InstallPower Cables
[* blackicon_caution] Before handling the board ground yourself by touching a large metal object. Also avoid placing the board on carpet or anything that may cause a static charge.
[* red] Fix the black and red power cables into the connector on the control board.
[* orange] Oreientate the cables upwards as shown in the photo.
[* green] Connect Red to + and Black to - as marked on the board.
[* blue] Make sure to insert the stripped section of the cable into the connector entirely and to fasten the set screw down TIGHTLY.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added