Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #16

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Control Board Install and Wiring
[* orange] Fix the ribbon cable to the back of the touch screen displaydisplay, route it under the control board and connect the other end to the board.
[* redyellow] Mount the control board to the base with four M3 x 6mm bolts.
[* green] Route the display cable under the board and connect it to the control board.
[* blue

[* light_blue
] Plug the electronics fan cable into the white port on the control board.
[* violet] Fixred] Attach the power cable connectors to the PSUterminals on the power supply.
[* orange] Fix the ribbon cable to the back of the touch screen displaydisplay, route it under the control board and connect the other end to the board.
[* redyellow] Mount the control board to the base with four M3 x 6mm bolts.
[* green] Route the display cable under the board and connect it to the control board.
[* blue

[* light_blue
] Plug the electronics fan cable into the white port on the control board.
[* violet] Fixred] Attach the power cable connectors to the PSUterminals on the power supply.
[* icon_note] Red = +
[* icon_note] Black = -

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Deleted