Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #16

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Control Board Install and Wiring
[* orange] Fix ribbon cable to the back of the touch screen display.
[* red] Mount the control board to the base with four M3 x 6mm bolts.
[* green] Route the display cable under the board and connect it to the control board.
[* blue] Plug the electronics fan cable into the white port on the control board.
[* violet] Fix the power connectors to the PSU
[* icon_note] Red = +
[* icon_note] Black = -

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added