Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #16

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Control Board Install and Wiring
[* orange] Fix the ribbon cable to the back of the touch screen display, route it under the control board and connect the other end to the board.
[* yellow] MountSecure the control board to the base with four M3 x 6mm bolts.
[* light_blue] Plug the electronics fan cable into the white port on the control board.board '''next to the red connector.'''
[* red] AttachSecurely attach the power cable connectors to the terminals on the power supply.
[* yellow] MountSecure the control board to the base with four M3 x 6mm bolts.
[* light_blue] Plug the electronics fan cable into the white port on the control board.board '''next to the red connector.'''
[* red] AttachSecurely attach the power cable connectors to the terminals on the power supply.
[* icon_note] Red = +
[* icon_note] Black = -