Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

+[title] Position Servo
+[* icon_caution] Make sure the power is off and the printer is disconnected from your computer before starting!
+[* red] Using the servo arm rotate the servo gear clockwise as far as it will go.
+[* green] Next re-insert the arm as shown in the second photo and rotate the servo gear counter clockwise 120 degrees (third of a full turn) to get to the position shown in the third image.
+[* icon_note] Remove the arm when done.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added