Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

+[title] PTFE Tubes
+[* icon_caution] First power off the printer.
+[* icon_note] Install the PTFE tubes:
+ [* green] Hotend #1
+ [* blue] Hotend #2
+[* icon_note] The PTFE tubes should go about 6CM into the Hotend from the top of the coupling. Not sliding a PTFE tubing in all of the way will clog and ruin the Hotend.
+[* icon_note] Power back on the printer

Image 1

No previous image

Added

Image 2

No previous image

Added