Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #13

Edit by Makertech

Edit approved by Makertech


Step Lines

+[title] Auto-levelling
+[* icon_note] With a successful Z Home send a command (G29) to start the auto-levelling procedure.
+[* red] The axes will home again and the sensor will now go around probing the platform.
+ [* icon_caution] Again, have your finger ready on the power switch to power off in the event of a crash.
+[* icon_note] Once the Auto-levelling has been completed, re-home all of the axes to return the nozzle to the centre of the platform.

Image 1

No previous image