Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Filament Extrusion
[* icon_note] Begin extruding filament.
[* orange] You should have a smooth and continuous flow of plastic coming out of both Hotend nozzles.
[* icon_caution] The extruded plastic will be hot!
[* icon_reminder] NOTE: When powering down from a hot Hotend, power the hotend down first and let it cool to at least 100C before completely powering off - as this prevents the heat from rising up the hotend with the absence of the fan cooling it.
[* icon_reminder] If you are not getting any filament extruded check the extruder motor is turning in the correct direction (anti-clockwise) to feed the filament. See next step if your extruder is turning in the wrong direction.

Image 1

No previous image

Added

Image 2

No previous image

Added