Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

+[title] Cura Settings - Defaults
+[* icon_note] For the calibration model we suggest using the default settings in CURA.
+ [* light_blue] Extruder: Select the Hotend you would like the changes in the settings to affect.
+ [* orange] Material: Makertech PLA+ (the included sample filament)
+ [* yellow] Nozzle size: Set the nozzle size to match your setup, the default is 0.3mm.
+ [* green] 0.2mm Layer Height: A good compromise between speed and quality.
+ [* blue] 30% infill - 30% of the inside of the part will be plastic.
+ [* violet] Build Plate Adhesion - Brim: A single layer around the base of your model to prevent warping.

Image 1

No previous image

Added