Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #14

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

+[title] Inspecting the Callibration Print
+[* icon_note] The two parts of the Calibration Print will likely be either over-lapping each other or be leaving a gap.
+[* icon_note] Depending on how the print looks we will adjust the X/Y offsets in Cura with the aim of getting the two parts to line up.
+[* red] Offsets are entered in Machine Settings under the ***Hotend #2*** Tab.

Image 1

No previous image

Added