Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #16

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] MOSFET Mounts
[* icon_caution] Only complete this step if you have the heated bed upgrade.
+[* icon_reminder] The standoffs and bolts for this step can be found in the ***heated bed fastener pack.***
[* icon_note] Like the control board, fix the MOSFET stand-offs onto the base in the position shown.
[* green] M3 x 6mm bolt
[* red] M3 x 10mm standoff
-[* icon_reminder] The standoffs and bolts for this step can be found in the ***heated bed fastener pack.***