Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #15

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Flexplate (Upgrade)
[* icon_note] Before starting make sure the flexplate surface is ***clean***.
[* green] Peel away the backing from the right side of the surface sticker.
[* blue] Fix the sticker onto the edge of the flexplate making sure to carefully align it with the top and bottom edges.
[* green] Pull away the backing paper and press down the sticker.
-[* black] Check that the flexplate attached to the platform.
+[* icon_note] Check that the flexplate attaches well to the platform.