Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #12

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Connect to Pronterface
[* icon_note] Open the Pronterface software.
[* red] Set the port to the same COM number.
[* green] Set the baudrate to 250000.
[* blue] Finally, hit connect.
+[* icon_reminder] If you get an EEPROM error send ''M502 ''followed by ''M500 ''to reset and save the EEPROM.